Official Journal of the European Union
Harmonised standards updating list in compliance with the 2014/34/UE directive relating to equipment and protective systems intended for use in potentially explosive atmospheres.
The list hereunder is a compilation of the references of harmonised standards which have been published on the Official Journal of the European Union C371, dated 12/10/2018.
This list is not complete and it does not have any legal validity, but it is a help to update our Clients.
|
New Standard |
Reference of superseded standard (Date of cessation of presumption of conformity of superseded standard) |
|
EN 14986:2017 Design of fans working in potentially explosive atmospheres |
EN 14986:2007 (31.01.2020) |
|
EN ISO 80079-36:2016 Explosive atmospheres — Part 36: Non-electrical equipment for explosive atmospheres — Basic method and requirements (ISO 80079-36:2016) |
EN 13463-1:2009 (31.10.2019) |
|
EN ISO 80079-37:2016 Explosive atmospheres — Part 37: Non-electrical equipment for explosive atmospheres — Nonelectrical type of protection constructional safety ‘c’, control of ignition sources ‘b’, liquid immersion ‘k’ (ISO 80079-37:2016) |
EN 13463-5:2011 EN 13463-6:2005 EN 13463-8:2003 (31.10.2019) |
|
EN 50271:2018 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen — Requirements and tests for apparatus using software and/or digital technologies |
EN 50271:2010 (15.6.2021) |
|
EN 60079-29-1:2016 Explosive atmospheres — Part 29-1: Gas detectors — Performance requirements of detectors for flammable gases IEC 60079-29-1:2016 (Modified) |
EN 60079-29-1:2007 (23.12.2019) |
|
EN 60079-30-1:2017 Explosive atmospheres — Part 30-1: Electrical resistance trace heating — General and testing requirements IEC/IEEE 60079-30-1:2015 (Modified) |
EN 60079-30-1:2007 (6.3.2020) |
If you need more details, see the Official Journal of the European Union C371, to the following website.
2006/42/CE directive on machinery
Official Journal of the European Union C332, dated 9.3.2018
Commission communication in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council on machinery, and amending Directive 95/16/EC
A-type standards
A-type standards specify basic concepts, terminology and design principles applicable to all categories of machinery. Application of such standards alone, although providing an essential framework for the correct application of the Machinery Directive, is not sufficient to ensure conformity with the relevant essential health and safety requirements of the Directive and therefore does not give a full presumption of conformity
|
New Standard |
Reference of superseded standard (Date of cessation of presumption of conformity of superseded standard) |
|
EN ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction (ISO 12100:2010) |
EN ISO 12100-1:2003 EN ISO 12100-2:2003 EN ISO 14121-1:2007 (30.11.2013) |
OFFICIAL JOURNAL OF THE EUROPEAN UNION L270 dated 24.10.209
COMMISSION IMPLEMENTING DECISION (EU) 2019/1766 of 23 October 2019 amending Implementing Decision (EU) 2019/436 as regards harmonised standard EN ISO 19085-3:2017 for numerically controlled boring and routing machines
ANNEX
In Annex II to Implementing Decision (EU) 2019/436, the following row is added:
|
Standard |
|
|
EN ISO 19085-3:2017 Woodworking machines – Safety requirements – Part 3: Numerically controlled (NC) boring and routing machines Notice: With regard to its point 6.6.2.2.3.1, the harmonised standard EN ISO 19085-3:2017 does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.4.1 of Annex I to Directive 2006/42/EC, which requires that guards and protective devices must not be easy to by-pass. |
C |
If you need more details, see the Official Journals of the European Union, to the following website.